We ship Australia Wide*. Shipping $25 flat fee. FREE shipping on orders over $500

Slimline Venetians Installation Guide

Install blinds quickly and easily with our step-by-step installation guide for slimline venetian blinds

Parts included in the package:

  • Brackets (two types: one for the control side, the other for the non-control side)
  • Blind
  • Child safety chain cleat
  • Timber fit screws

Inside (recess) mount installation

 Step 1: Mount the brackets

  • Hold the front of the bracket level with the front edge of the inside of the frame
  • Clearly mark where you are going to position your brackets and screws and pre drill screw holes if necessary
  • Fix into place by screwing through up the top of the bracket. Spread the brackets evenly across the frame ensuring not to place a bracket where it could interfere with the tilt mechanism or the round drum that sits inside the head box of the blind that holds the strings of the blades in place

 Step 2: Install the blind

  • With the blind in the up position, angle the front of the head box upwards and rest the front inside section of the head box onto the front hooks of the bracket. Then push the back of the head box up until you hear the bracket click into place
  • Release the cord and drop the blind down ready for use
  • CHILD SAFETY: Fit the cleat so the cords can be safely wound when the blind is up. For more information on child safety, please refer to our child safety page

Outside (face) mount installation

 Step 1: Mount the brackets

  • Hold the brackets level with the top edge of the frame (or if you are mounting onto a wall, where you would like your blind to sit on the wall)
  • Clearly mark where you are going to position your brackets and screws and pre drill screw holes if necessary
  • Fix into place by screwing through the back of the bracket. Spread the brackets evenly across the frame ensuring not to place a bracket where it could interfere with the tilt mechanism or the round drum that sits inside the head box of the blind that holds the strings of the blades in place

 Step 2: Install the blind

  • With the blind in the up position, angle the front of the head box upwards and rest the front inside section of the head box onto the front hooks of the bracket. Then push the back of the head box up until you hear the bracket click into place
  • Release the cord and drop the blind down ready for use
  • CHILD SAFETY: Fit the cleat so the cords can be safely wound when the blind is up. For more information on child safety, please refer to our child safety page

Removing the blind

  • Raise the blind and lock into place
  • Push the head box back and allow the back of the blind to drop down
  • Remove the front of the blind from the front hooks of the brackets

CONNECT WITH US